Home › Free workplace documents › Construction sites

Free template · PDF and Word

First aid needs assessment template for construction sites

Free first aid needs assessment template for construction sites and contractors: higher-hazard numbers, remote sites and shared sites.

First aid needs assessment template for construction sites (cover)

Construction is a higher-hazard workplace, so HSE's numbers are bigger and the injuries are more serious. A needs assessment for a site has to cover the whole workforce, every contractor, and how the ambulance finds you.

Use the free template below, add the site points on this page, and review it whenever the site layout or workforce changes.

What to look for in construction sites

Work at height and fallsScaffolds, ladders and edges lead to serious injuries. Plan for spinal injury and how to move a casualty safely.
Plant, vehicles and moving machineryCrush injuries and severe bleeding. A bleeding control kit and trained first aiders matter.
Cuts, eye injuries and impactPower tools, cutting discs and flying debris. Eye wash must be on site.
Hot works, chemicals and dustBurns and inhalation. Know what is on site and what first aid it needs.
Remote or changing sitesGive the ambulance service a clear site address and access point, and brief every new worker.

Who to include

Direct employees, sub-contractors, agency labour, visitors and delivery drivers. Principal contractors often set first aid rules for everyone on site, so agree who provides what.

How many first aiders?

For higher-hazard work, HSE suggests at least an appointed person for fewer than 5 people, at least one first aider trained in EFAW or FAW for 5 to 50 people (depending on the injuries that could happen), and at least one FAW first aider for every 50 people above that. On most sites a fully trained First Aid at Work first aider is the sensible choice.

The rule to know

The Construction (Design and Management) Regulations 2015 require welfare facilities, and the principal contractor usually arranges site first aid. Subcontractors still need to show their own people are trained and the assessment is recorded.

The seven steps

  1. Find the hazards in your construction sites.
  2. List who is at risk, inside and outside your team.
  3. Check your accident history for the last three years.
  4. Look at shifts, holidays and sickness.
  5. Think about how fast help can arrive.
  6. Decide numbers, kits and equipment, using HSE's suggested numbers as the starting point.
  7. Write it down, tell your team and review it every year.

The free template follows exactly these steps.

Courses that usually fit

Send me the free template

PDF and editable Word, with the kit checklist and the certificate tracker. One email, nothing else unless you tick the box.

Questions people ask

Which first aid course does a construction site need?

Most sites choose the three-day First Aid at Work course because of the higher risk. A small, lower-risk team may need only Emergency First Aid at Work, so your assessment decides.

Does every contractor need their own first aider?

Not always. Contractors can rely on the principal contractor's provision if it is agreed in writing, but they must still assess their own risks.

What should the first aid kit contain?

Your assessment decides. Larger sites often use a BS 8599-1 large kit plus bleeding control and eye wash.

More workplace templates

What to do next

Written and checked by Esin O. FRSA, founder and lead trainer at Core Aid Training. Based on HSE guidance (L74, 2024 reissue; INDG214). Last reviewed November 2026.